Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS > CABLE STAPLES
Sort By:
1 2 3
Gardner Bender GSE-15310 Service Entrance Staple Gardner Bender MS-1550T Cable Staple Gardner Bender MS Cable Staple
Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
Gardner Bender MS-1575T Cable Staple Gardner Bender MSI-1525T Insulated Cable Staple Gardner Bender PSG Low Voltage Cable Staple
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
Gardner Bender PWS Low Voltage Kwik Mount Cable Staple Gardner Bender PSB Cable Staple Gardner Bender MS-1555 Cable Staple
Quick fastening and guiding of wires. Wires easily snap in or out of two usable sides. Use to secure Christmas light sets, sound system wires, etc. Holds category 5 cable for datacom. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
Gardner Bender GSE-15410 Service Entrance Staple Gardner Bender MSI-50B Insulated Cable Staple Gardner Bender GSE-402 Service Entrance Strap
Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage.
Gardner Bender MS Cable Staple Gardner Bender GSE-205 Service Entrance Strap STAPLE METAL INSULATED 1/2IN
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage.
Gardner Bender MSB Insulated Low Voltage Cable Staple Gardner Bender MSW Insulated Cable Staple Gardner Bender GSE-304 Service Entrance Strap
U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire. U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage.
Gardner Bender PS-50 Insulated Cable Staple Gardner Bender GSE-105 Service Entrance Strap Gardner Bender PSB Low Voltage Cable Staple
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Plastic insulated straps secure service entrance cable. Electro-zinc plated nails. Cradles constructed of polyethylene. Straps stabilized against UV rays and extreme cold, withstands deterioration and breakage. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
Gardner Bender PMB-1525 Low Voltage Cable Strap Gardner Bender MS-1577 Cable Staple Gardner Bender PSW-1650T Cable Staple
For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
Gardner Bender PCC Low Voltage Clip-On Cable Staple GB-Gardner Bender MSI-1575 Cable Staples GB PTP-25T Category 3 and 5 Low Voltage Data Staple
Used for indoor and outdoor applications. UV resistant polyethylene saddle. Zinc plated nails. Secures RG-49, RG-59 and RG-6 coaxial cables. With clip-on feature. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. GB Data Staple, Category 3 and 5, Low Voltage, 1/4 in Crown, Polyethylene, Zinc Plated, Blue, Suitable For Use With: RJ-11, RJ-12, RJ-45, Category 3 and Category 5 Wire to Wood, 1/4 in Width, For Mounting to Wood Surfaces
Gardner Bender PS-75 Insulated Cable Staple Gardner Bender PS-1550T Insulated Cable Staple Gardner Bender PS-1575T2 Insulated Cable Staple
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
   
 
1 2 3