Home > PAINT & SUNDRIES > PAINT > PRIMERS & SEALERS > MASONRY SEALERS
Sort By:
1 2
Drylok 27512 Latex Based Masonry Waterproofer Quikrete 8730-02 Concrete Cure and Seal Weiman 5092 Stone Spray-N-Seal Penetrating Sealer
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Protects and seals concrete surfaces against water, salt, grease, etc. Promotes proper curing by retaining water in freshly placed concrete. Used for curing new concrete. Protects natural stone surfaces from staining. For stone countertops, floors, walls, vanities and even grout. Also for sealing all types of masonry, stucco, concrete and sanded grout. Has special blend of polymers that bond to the stone and creates a water and oil repellant membrane to prevent staining and allows the stone to breathe and release moisture vapors. Safe for interior and exterior use and is UL Classified for slip resistance. Coverage varies depending on surface.
Damtite 01071 Waterproofer Powder SEALER HI-GLOSS LATEX BASE    Zinsser 5001 Watertite Waterproofing Paint
Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). Protects and beautifies stucco, brick, bare or painted concrete, pavers, stamped concrete, and exposed aggregate, as well as natural and artificial stone. Resists de-icing salts. Saltlok technology helps prevent the leaching of minerals and salt. Coverage: 200-400 square feet per gallon. Hour dry time. Guaranteed to stop up to 34psi of water pressure - twice the strength of other waterproofers. Prevents the growth of mold and mildew on the paint film for up to 5 years. Smooth, non-gritty finish applies easily to wet or dry walls. Ultra low odor oil-base formula has even less odor than latex paint. Great for basements and other interior/exterior above and below grade masonry surfaces. Watertite contains a mildewcide that prevents the growth of mold and mildew on the paint film only.
Henry PR1760074 Premier Foundation Coating Damtite 03550 Masonry Waterproofer Henry RC065070 Roofers Choice Foundation Coating
Environmentally friendly. Asphalt emulsion. For spray or brush application to existing or new, green or damp concrete and masonry surfaces. For below grade applications to foundations, both poured concrete and CMU block. No odor, soap and water cleanup. High performance masonry waterproofer used for above or below grade applications. Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco. Use on basement walls, retaining walls, fountains, birdbaths, planters and more. Fast drying, low odor and tintable to light pastel shades. Easy clean up. Reduces Radon Gas penetration through concrete block walls. Covers up to 150 sq. ft. (11.6 m2) per gallon. Cures to a tough, flexible, weather resistant film. Because of its ability to retain its pliability, the coating resists damage which may result from expansion and contraction caused by weather and temperature variation. Use as an exterior underground foundation coating and dampproofer for brick, concrete, cement block, and similar surfaces. May be used as an underground exterior foundation coating and dampproofer. Covers approximately 1 to 2 gallons per 100 square feet.
Drylok 00542 Masonry Waterproofer United Gilsonite 22113 Masonry Waterproofer Damtite 01351 Supertite Masonry Waterproofer
Decorates and waterproofs masonry walls. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, field stone foundations, retaining walls, basements and foundations. Cleans up with warm, soapy water. Coverage depends on surface porosity. Each 35 lb. will cover 140-210 sq. ft. with the first coat, 210-280 sq. ft. with the second coat. Protective coating for masonry surfaces. Prevents moisture damage. Penetrates deep to seal and protects masonry against acids, alkalis, household chemicals, gasoline, oil and salt. Covers up to 400 sq. ft. per gallon depending on surface porosity. Adheres to all types surfaces. A heavy duty, Portland cement coating that includes a dry polymer resin to increase adhesion to all types of masonry surfaces. Eliminates need for liquid bonding agent to add to mix. Seals pores, cracks, voids and smooths rough surfaces. Protects against moisture penetration while beautifying and protecting concrete, stone, masonry, stucco and brick. Use above or below grade, inside or outside. Safe for coating inside of potable water cisterns or concrete water tanks. Holds back 22 psi of hydrostatic pressure. Covers up to 260 sq ft (24.2 sq m) per 35 lb pail.
Damtite 02501 Waterproof Coating Henry PR175070 Premier Foundation Coating Damtite 01501 Waterproof Coating
Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water. A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. Economical, heavy-duty, Portland cement-base coating to seal and protect concrete, masonry, brick, stone and stucco. Apply to wet or dry walls. Breathable coating so no moisture becomes trapped behind the surface. Holds back 12 PSI water pressure. Heavy duty formula. Can be used as an exterior, below grade foundation sealer on concrete block or poured concrete, prior to applying asphaltic-base coatings. Also for sealing and beautifying basement & garage walls, retaining & sea walls; Safe for coating the inside of cisterns for drinking water.
Henry PR175042 Premier Foundation Coating Damtite 01211 Waterproofer Powder Drylok 27613 Latex Based Masonry Waterproofer
A cold applied liquid asphalt in a solvent system. Penetrating type coating formulated to provide a durable, weather resistant film. For long-wearing protection of foundation coating. Also use to dampproofing above and below grade exterior concrete and masonry walls and foundations that are thoroughly dry. Covers 1.5 to 2.0 gallons per 100 sq. ft. depending upon the porosity and roughness of the surface. Portland-cement base coating. Holds back 22psi of hydrostatic pressure. Safe for drinking water cisterns. Seals, protects and beautifies vertical walls constructed of concrete, masonry, brick or stucco. Eliminates dampness and resists mildew, flaking or chalking while sealing all pores and voids. Helps reduce Radon Gas penetration through concrete block walls. Just add water to powder and mix; brushes on like paint. Mix with Damtite Bonding Additive in place of water for previously-painted or non-porous surfaces (poured concrete). Coverage (varies by porosity of surface and by first or second coat): 7lb to 93 sq ft (8.6 m2); 21lb to 280 sq ft (26 m2); 45lb to 600 sf (55.7 m2). Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
Drylok 27513 Ready-To-Use Concrete Sealer Drylok 27514 Latex Based Masonry Waterproofer SEALER CONCRETE WET LOOK 1 GAL
Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Formulated to waterproof above or below grade masonry walls, cinder and concrete blocks, stucco, brick, retaining walls, basement, and foundations. Tintable. Low Odor. Non-flammable. Resists 10 psi water pressure. Apply with brush and/or roller. Complies with all current VOC requirements. Passes performance requirements of Fed. Spec. TT-P-1411-A. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?wet look?, high gloss finish.
SEALER CONCRETE NATRAL LOOK 1G Drylok 28613 Latex Based Masonry Waterproofer WATERPROOF MASONRY GRAY 1G
Seals and protects concrete and masonry surfaces from the damaging effects of water, chemicals, and UV light. For use on driveways, patios, walkways, pool decks, basements and more. Provides a protective barrier to keep water out, protect against stains, and extend the life of your concrete while leaving a ?natural look?, low gloss finish. For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity. For the most demanding conditions. For above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick. Formulated to resist mildew growth on the paint film. Stops 15 psi. Passes ASTM D-7088 Resistance to Hydrostatic pressure and ASTM D-6904 resistance to wind driven rain. Covers 75 to 125 sq. ft per gallon depending on surface porosity.
SEALER CONCRETE CLEAR GAL     SEALER CONCRETE GRAY GAL      MOISTURE STOP 1 GALLON
SEALER CONCRETE CLEAR GAL
Our Price: $66.62
SEALER CONCRETE GRAY GAL
Our Price: $66.62
MOISTURE STOP 1 GALLON
Our Price: $70.08
High-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. High-performance, high solids concrete sealer that is easy to apply, quick drying, nonflammable and UV stable. Applied at a minimum of two coats, designed to protect all exterior absorbent concrete and masonry surfaces on residential and commercial applications, including driveways, sidewalks, patios, courtyards, walkways, pool decks and most vertical concrete surfaces. For use on concrete prior to coating. Penetrates into concrete and reacts with the free calcium and water to form a gel in cracks, pores and capillaries to protect against the ingress of water and contaminants. This allows surfaces that were previously uncoatable, due to moisture, to be coated. Strengthens and seals from the inside out.
Drylok 20713 Oil Based Masonry Waterproofer Drylok 20813 Masonry Waterproofing Paint WATERPROOFER MASONRY CLEAR 1G
Ready mixed, tintable. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, basements and more. Resists 10 psi water pressure. Contains synthetic rubber and Portland cement. Performance conforms to Federal Specifications TT-P-1411-A. VOC Compliant. Covers 75 to 125 sq. ft per gallon depending on surface porosity. Ready mixed, tintable. Use on above or below grade masonry walls, cinder and concrete blocks, stucco, brick, basements and more. Resists 10 psi water pressure. Contains synthetic rubber and Portland cement. Performance conforms to Federal Specifications TT-P-1411-A. VOC Compliant. Covers 75 to 125 sq. ft per gallon depending on surface porosity. For above or below grade walls, floors, basements, retaining walls, decorative brick and stone facades, and more. Creates a moisture vapor barrier on floors as a finish coat or under latex paint or as a primer prior to applying floor coverings. Reduces radon gas penetration. Protects against 98 mph wind driven rain on decorative vertical surfaces. First clear (non-pigmented), abrasion-resistant, high-gloss waterproof coating approved for floor and wall applications. Not intended for use with vehicle traffic. Covers 90-100 square feet per gallon. 2 hour dry time. 4 hour recoat time. Clear, high-gloss finish. Withstands 4 PSI.
   
 
1 2