Home > HARDWARE > CONSTRUCTION HARDWARE > JOIST HANGERS & CONNECTORS
Choose a sub category:
JOIST HANGERS FRAMING ANGLES/ANCHORS MENDING PLATES
NAIL PLATES POST ANCHORS / CAPS FENCE BRACKETS
BRIDGING INSULATION SUPPORTS STRAPS
PLYWOOD CLIPS FOUNDATION ANCHORS BRICK/WALL TIES
MISC CONSTR HARDWARE
Sort By:
1 2 3 ... 6
USP Lumber JL26IF-TZ Standard Invert Flange Joist Hanger USP Lumber PCP Post Cap USP Lumber JL210IF-TZ Standard Invert Flange Joist Hanger
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Seamless, keeps water off post tops to protect wood from moisture damage. Corrosion-proof and paintable. Requires one 8d HDG or 10d HDG nail for installation. 3-5/8"W - For 4 x 4 Post/Column. Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber JL28IF-TZ Standard Invert Flange Joist Hanger USP Lumber PC12-BMC Plywood Clip USP Lumber RT16ATZ Double Plate Hurricane/Seismic Anchor
Speed prongs designed to temporarily position hangers on headers for more convenient nail fastening. G-185 galvanizing finish. Meets ICC-ES ESR-1781, FL43285, Dade county, FL11-0510.01 and L.A. City RR25843 codes. For additional information including allowable loads and fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. USP Lumber Plywood Clip, Series: PC, 1/2 in Thickness, 20 ga Steel, Galvanized, Grade: G90 Anchor tie trusses and rafters to top plates and may be used to tie wood framing members to resist uplift and lateral forces. Typical Truss/rafter to double plate installation. Requires Meet ICC-ES ESR-1465 and FL817 codes.
USP Lumber JUS210-2TZ Double Shear Slant Joint Hanger USP Lumber B Reinforcement Corner Brace RH Tamlyn PC1532 Plywood Clip
Double shear nailing for fewer nails and faster installation. Dimples allow for 45 degree nailing through joist into header, resulting in higher loads and less nailing, and eliminate need for shorter joist nails in 2x applications. Meets ICC-ES ESR-1881, FL821, L.A. City RR25779, Dade county, FL 11-0510.01 and 07-0419.01 codes. For additional information including allowable loads and fasteners. Please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. USP Lumber Corner Brace, Multi-Purpose, Reinforcement, Series: B, 6 in Length, 1-1/2 in Width, 12 ga Steel, Grade: G90, Galvanized, For 90 deg Wood-To-Wood Connections RH Tamlyn Plywood Clip, Series: PC, 15/32 in Thickness, Aluminum, Mill, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction
RH Tamlyn PCS716 Plywood Clip RH Tamlyn PCS12 Plywood Clip RH Tamlyn PCS1532 Plywood Clip
RH Tamlyn Plywood Clip, Series: PCS, 7/16 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction RH Tamlyn Plywood Clip, Series: PCS, 1/2 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction RH Tamlyn Plywood Clip, Series: PCS, 15/32 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction
USP Lumber SKH28R-TZ Skewed Left Joist Hanger USP Lumber SKH28L-TZ Skewed Left Joist Hanger Squeek No More 1011345 Screw Set
Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments. Standard stock 45 degree skew hanger for common standard lumber, engineered lumber and plated truss applications. Flexible design for 40 to 50 degree skew range. Meets ICC-ES ESR-1781, FL13285, L.A. City RR25843 and Dade County, FL 11-0510.01 codes. For additional information including allowable loads and fasteners, Please See USP Structural Connectors charts in the Orgill paper catalog R7 Reference Pages. Joist size is adjustable in 2 inch increments. Specially scored waxed screws. Scored head breaks off at the same place every time. Carded.
RH Tamlyn PCS58 Plywood Clip Acorn IHW16100 Insulation Support Wire 16 in L USP Lumber NA11-5MC Joist Hanger Nail
RH Tamlyn Plywood Clip, Series: PCS, 5/8 in Thickness, 20 ga Steel, Galvanized, For Quick, Easy Installation Between Plywood Panels for Roof Sheathing or Panelized Construction Acorn Insulation Support Wire, 16 in Length, Carbon Steel, Class 50, For Use in Poultry Pens, Animal Enclosures, Storage Bins, Garden Fencing, and Plant Supports Structurally rated. For use with MiTek/USP Lumber Connectors' products. For additional information including withdrawal load and allowable shear per nail, please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages.
USP Lumber NA9-5MC Joist Hanger Nail Squeek No More 1010543 Floor Squeak Repair Kit Acorn IHW24100 Insulation Support Wire 24 in L
Structurally rated. For use with MiTek/USP Lumber Connectors' products. For additional information including withdrawal load and allowable shear per nail, please See USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Squeek No More Floor Squeak Repair Kit, 53 Pieces, Includes: (1) Alignment and Depth Control Fixture, (50) Specially Scored Waxed Screws, (1) Special Driver Bit, (1) Complete Instruction Kit, Used to Hardwood Floors, Carpet and Stairs Secures batt-type insulation in place between joists. Chisel cut ends dig into joists for permanent holding. Easy to install in hard-to-reach crawl spaces. Pushes into place. Overall length is 1/2" less than over center joist spacing. 13 Gauge.
Deckmate 90166 Deck Bench Bracket with Bench Bracket USP Lumber RS20-R Coiled Strap ANGLE 2X4IN TRIPLE ZINC 12GA
Deckmate Deck Bench Bracket, 2 X 4 in, 2 X 6 in Post/Joist, Structural Resin, Sand, With Bench Bracket, Hardware and Instructions Enables cut-to-length convenience for job site needs. G90 galvanizing finish. 1-1/2" nail spacing. Meets ICC-ES ESR-1831, FL822 and L.A. City RR25836 codes. For additional information including allowable loads and number of fasteners, please see USP Lumber Connectors charts in the Orgill paper catalog R7 Reference Pages. Provides a 90? connection for medium/heavy duty applications; stronger than angled nailing or screw fastening; help ensure joints are consistently straight and strong.
Acorn IHW16500 Insulation Support Wire 16 in L RH Tamlyn BT 22SP Corrugated Straight Brick Wall Tie RH Tamlyn BT22ZZSP Corrugated Scalloped Zig Zag Brick Wall Tie
Acorn Insulation Support Wire, 16 in Length, Carbon Steel, Class 50, For Use in Poultry Pens, Animal Enclosures, Storage Bins, Garden Fencing, and Plant Supports Masonry accessory used to tie a brick veneer to the exterior of the house. 2 holes provide for nailing on one end; other end is bent to lie between the mortar joints. Follow local codes for spacing. 6-3/8" x 7/8". Boxed. RH Tamlyn Brick Wall Tie, Corrugated, Scalloped, Zig Zag, Series: BT, 6-3/8 in Length, 0.029 in Thickness, Nail Fastener, 8d X 2-1/2 in Fastener, 1370 lb Load Capacity, 7/8 in Width, 22 ga Steel, ASTM A153, Hot Dip Galvanized, Grade: B3, Used on Wood Stud Construction
Hopkins 90128 Shelf Link 4 ft L x 2 ft W RH Tamlyn BT28ZZ5SP Corrugated Scalloped Zig Zag Brick Wall Tie RH Tamlyn BT28500SP Corrugated Straight Brick Wall Tie
You can determine the size and configuration, just add 2x4's to the ShelfLinks to make functional and custom shelving in any length, height and configuration. Made of structural resin. Can support spans up to 8'. Includes ShelfLinks, hardware and instructions. LUMBER NOT INCLUDED. RH Tamlyn Brick Wall Tie, Corrugated, Scalloped, Zig Zag, Series: BT, 6-3/8 in Length, 0.029 in Thickness, Nail Fastener, 8d X 2-1/2 in Fastener, 604 lb Load Capacity, 7/8 in Width, 28 ga Steel, ASTM A153, Hot Dip Galvanized, Grade: B3, Used on Wood Stud Construction RH Tamlyn Brick Wall Tie, Corrugated, Straight, Series: BT, 6-3/8 in Length, 0.029 in Thickness, Nail Fastener, 8d X 2-1/2 in Fastener, 604 lb Load Capacity, 7/8 in Width, 28 ga Steel, ASTM A153, Hot Dip Galvanized, Grade: B3, Used on Wood Stud Construction
   
 
1 2 3 ... 6