Home > HARDWARE > GENERAL HARDWARE > CABINET & DRAWER HARDWARE > DRAWER SLIDES
Sort By:
1 2
Prime Line R 7085 Drawer Track Guide Kit Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line R 7145 Drawer Track Backplate Prime Line R 7084 Drawer Track Guide Kit Prime Line R 7082 Drawer Track Guide Kit
Used to hold track to back of cabinet; fits most popular side mount rails. Contents: 2 backplates; 2 sets of installation screws. Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line R 7130 Drawer Track Guide Kit Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly
Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks. Optional bracket for use with draw slide No.1284. Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners.
Prime Line R 7148 Convex Drawer Track Roller Prime Line R 7141 Drawer Track Roller BRACKET RR MT F/MDL 84-8450 ZN
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish.
Prime Line R 7132 Drawer Track Back Roller with Plastic Roller BRACKET RR MT F/MDL TT100 ZINC BRACKET REAR MNT F/MDL 1805 ZN
Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket.
Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate Prime-Line R 7321 Drawer Track Guide and Glide Knape & Vogt 1805HWH400 Euro Self-Close Drawer Slide
White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip. Used on furniture drawer systems; for dressers, hutches and night stand drawers. Opening for metal track on larger piece measures 15/16" x 3/32". Kit includes 2 dark-brown, plastic track case guides and 2 track guides, 4 white, plastic corner glides, 8 ring shank nails for nailing in corner glides (3/4" x 14-1/2 ga.), and 8 Phillips drive, pan head screws for installation of guides (#6 x 5/8"). Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1175P ZC 20 Light Duty Single Track Drawer Slide SLIDE DRWR 75LB 300MM WHT 12IN Knape & Vogt 1175P ZC 22-5/8 Light Duty Single Track Drawer Slide
Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions.
Knape & Vogt 1805HWH450 Euro Self-Close Drawer Slide Knape & Vogt 1175P ZC 24 Light Duty Single Track Drawer Slide Knape & Vogt 1805HWH500 Euro Self-Close Drawer Slide
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Light-Duty slide designed for general drawer applications. Mounts with staples or screws. Height: 1". Required Clearance:1/8" each side; 1-1/2" from rear of drawer to cabinet; drawer to be 3/8" shallower than opening. High density polyethylene rollers. Drawers lift out for easy removal. Packaged with screws and installation instructions. Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1805HWH550 Euro Self-Close Drawer Slide Knape & Vogt 1284PWH400 Euro Roller Slide Knape & Vogt 1284PWH450 Drawer Slide
Specially designed for use in kitchen cabinet, commercial millwork, home office and RTA furniture applications. Adaptable to face frame or 32mm mounting. Single captive roller limits side play for improved lateral stability. Positive double out-stop. Positive in-stop. Lift-out disconnect. Four way adjustment slots. Positive lock-open position. Cabinet member side mounts. Additional rear mounting socket available for face frame applications. Drawer member fastens to either side or bottom of drawer. Height 1.4". Required Clearance; Side: 1/2" plus 1/32" minus 0 each side. Top:1" required for drawer lift out. Bottom: None drawer can rest on cabinet. Packed with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
Knape & Vogt 1260P-16 Light Duty Drawer Slide Knape & Vogt 1284PALM500 Euro Roller Slide Knape & Vogt 1284PWH500 Drawer Slide
Light-Duty slide designed for general cabinet, desk and fixture application. Height: 3-1/8". Required Clearance: 1/2" plus 1/32" minus 0 each side. Features Positive stop. Stay-closed design. Depress stop lever for drawer removal. Dust shielded ball bearing rollers. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18". Medium-duty slide designed for kitchen cabinet and bathroom vanity applications. Adaptable to frame mounting and 32mm mounting system. Solid stud and captive roller reduces side play. Positive stop, lift-out disconnect, stay-closed design. Adjustment slots on both the drawer member and the cabinet member ease installation. Screws fasten to either side or bottom of drawer. Positive lock-out feature is ideal for pull out work surfaces. Height: 1-9/32". Required Clearance: 1/2" plus 1/32" minus 0 each side. 1" between overall drawer side height and cabinet opening height required for drawer insertion and removal. Packaged with screws and installation instructions. Maximum drawer width 18".
   
 
1 2